Get Your Free Feasibility Study

MWM Gas-fired Technology

INNOVATION, QUALITY AND SUSTAINABILITY

We’re the official distributor in the UK and Ireland for market leading MWM manufactured gas engine technology.

With outputs ranging from 400kWe to 4.5MWe, the MWM TCG series is capable of meeting the challenges of the dynamic market environment. MWM gas engines guarantee maximum efficiency, reliability, flexibility and environmental sustainability…together with low lifecycle costs and high profitability.

MWM TCG 3016 50HZ

Efficiency Goes Digital

  • 16cyl 800kWe
  • 12cyl 600kWe
  • 8cyl 400kWe

HIGH EFFICIENCY, LOW OPERATING COSTS

The TCG 3016 is has the highest efficiency in its output class through unique combination of long maintenance intervals (80,000 operating hours for natural gas) and high efficiency (electrical efficiency up to 43.5%).

REDUCED INSTALLATION AND BUILDING COSTS

The TCG 3016 has a smaller setup area than comparable gensets due to its compact design and integrated tanks for daily refilling. Due to the flanged genset concept, the vibration decoupling takes place directly between the gas engine and the base frame, helping to further reduce setup costs.

OPTIMISED LURICANT CONSUMPTION

Greatly reduced oil consumption of less than 0.1 g/kWhe – the TCG 3016 gas engine boasts the lowest lubricant consumption in its class.

FULLY DIGITALISED ENERGY SOLUTIONS

TPEM (Total Plant & Energy Management) eliminates the need for additional control systems, as all power plant data for the genset, backup genset, and plant control are combined in one system, resulting in high efficiency through optimum control of the power plant.

 

PERFORMANCE DATA SHEET

MWM TCG 2016 50HZ

Efficiency Across the Board

  • 16cyl 800kWe
  • 12cyl 600kWe
  • 8cyl 400kWe

MORE PROFIT

The TCG 2016 is highly efficient thanks to its optimised inlet duct, combustion chamber and spark plugs. You can save as much as 15% per annum on fuel costs – and increase your plant’s profitability.

LESS OVERALL COST

With its optimised engine components, the TCG 2016 requires up to 50% less lubricating oil than other similar gensets. In terms of efficiency that means long-term savings.

LOWER INSTALLATION COSTS

Thanks to its smaller dimensions (width x length), the TCG 2016 takes up to 50% less space than comparable systems, reducing time and installation costs.

AN OPTIMUM CONTROL CONCEPT

TEM (Total Electronic Management) controls not just the engine… but the entire system, including the heat supply from cogeneration. Temperature monitoring, for each cylinder and anti-knock control, ensure the best possible utilisation of fuel and maximum power output, even if gas composition fluctuates.

FLEXIBLE USAGE

The gas-mixer and TEM allows use for a wide variety of gases. Even the most problematic gases such as landfill gas and sewage gas can be used without difficulty.

PERFORMANCE DATA SHEET

MWM TCG 2020 50HZ

For the Highest Ratings in Ecology and Economy

  • 20cyl 2,000kWe
  • 16cyl 1,560kWe
  • 12cyl 1,200kWe

MORE PROFIT

The TCG 2020 is highly efficient thanks to its optimised inlet duct, combustion chamber and spark plugs. You can save as much as 15% per annum on fuel costs – and increase your plant’s profitability.

LESS OVERALL COST

With its optimised engine components, the TCG 2020 requires up to 50% less lubricating oil than other similar gensets. In terms of efficiency that means long-term savings.

Different engines to suit your needs

Whether you need high efficiency or an optimised standalone unit with good load compensation and black start properties, we can provide you with an engine that’s tailored exactly to your needs.

AN OPTIMUM CONTROL CONCEPT

TEM (Total Electronic Management) controls not just the engine… but the entire system including the heat supply from cogeneration. Temperature monitoring for each cylinder and anti-knock control ensure the best possible utilisation of fuel and maximum power output, even if gas composition fluctuates.

FLEXIBLE USAGE

The gas-mixer and TEM allows use for a wide variety of gases. Even the most problematic gases such as landfill gas and sewage gas can be used without difficulty.

PERFORMANCE DATA SHEET

MWM TCG 2032 50HZ

High Availability. Low Installation Costs

  • 16cyl 4,500kWe
  • 12cyl 3,333kWe

MORE PROFIT

The optimised maintenance concept with cylinder units simplifies accessibility and, along with the reduction of the number of different parts, minimises the time required for maintenance. This can save you up to 20% in service costs. At the same time, you profit from up to 30% less lubricating oil consumption compared to other engines.

LONGER RUN TIMES

Thanks to the extended service intervals, the TCG 2032 runs up to 200 hours longer per annum than comparable products. The major overhaul is scheduled after 80,000 operating hours.

GREATER RELIABILITY

The particle-free combustion, with chamber plugs, extends the service intervals for the exhaust gas heat exchanger and reduces service costs compared to other combustion methods. Major components such as pistons, conrods, spark plugs and cylinder heads have been improved to withstand the greater power output and to deliver increased electrical efficiency.

OPTIMUM EFFICIENCY

The interaction of all components has been improved even further. All components relevant for efficiency and power output are monitored by the TEM (Total Electronic Management). The new, upgraded wastegate in particular ensures a more efficient operation with changing conditions. This is also the case when the gas composition is fluctuating – thanks to fast response times due to the temperature monitoring for each cylinder. TEM not only controls the engine… but the entire system… including heat extraction.

FULL TURBO POWER

The high-pressure turbocharger A140, with an improved wastegate, allows operation with a broader air intake temperature range and up to higher altitudes.

PERFORMANCE DATA SHEET