Get Your Free Feasibility Study
Edina

MWM Gas Engine Technology

MWM

INNOVATION, QUALITY AND SUSTAINABILITY – MWM GAS ENGINES

Edina is the official UK and Ireland distributor for market-leading MWM gas engines rated from 400kWe to 10,300kWe.  We’ve held the distributorship rights since 2006, during which, Edina has become one of MWM’s largest customers with a growing install base of over 500 gas engines delivering over 700MW electrical capacity across these territories.

MWM gas engines can be operated with various gas types and are capable of meeting the challenges of the dynamic market environment.  MWM gas engines guarantee maximum efficiency, reliability, flexibility and environmental sustainability…together with low lifecycle costs and high profitability.

mwm gas engines

MWM TCG 3016 50HZ

400kWe - 800kWe

  • 16cyl 800kWe
  • 12cyl 600kWe
  • 8cyl 400kWe
Gas Engine 400kWe

Efficiency Goes Digital

HIGH EFFICIENCY, LOW OPERATING COSTS

The TCG 3016 genset is has the highest efficiency in its output class through unique combination of long maintenance intervals (80,000 operating hours for Natural Gas) and high efficiency (electrical efficiency up to 43.5 percent).

REDUCED INSTALLATION AND BUILDING COSTS

The TCG 3016 has a smaller setup area than comparable gensets due to its compact design and integrated tanks for daily refilling. Due to the flanged genset concept, the vibration decoupling takes place directly between the gas engine and the base frame, helping to further reduce setup costs.

OPTIMISED LURICANT CONSUMPTION

Greatly reduced oil consumption of less than 0.1 g/kWhe – the TCG 3016 gas engine boasts the lowest lubricant consumption in its class.

FULLY DIGITALISED ENERGY SOLUTIONS

TPEM (Total Plant & Energy Management) eliminates the need for additional control systems, as all power plant data for the genset, backup genset, and plant control are combined in one system, resulting in high efficiency through optimum control of the power plant.

PERFORMANCE DATA SHEET Gas Engine 400kWe

MWM TCG 2020 50HZ

1,200kWe - 2,000kWe

  • 20cyl 2,000kWe
  • 16cyl 1,560kWe
  • 12cyl 1,200kWe
Gas Engine 1200kWe

For the Highest Ratings in Ecology and Economy

MORE PROFIT

The TCG 2020 gas engine generator is highly efficient thanks to its optimised inlet duct, combustion chamber and spark plugs. You can save as much as 15 percent per annum on fuel costs – and increase your plant’s profitability.

LESS OVERALL COST

With its optimised engine components, the TCG 2020 gas engine requires up to 50 percent less lubricating oil than other similar gensets. In terms of efficiency that means long-term savings.

Different engines to suit your needs

Whether you need high efficiency or an optimised standalone unit with good load compensation and black start properties, we can provide you with an engine that’s tailored exactly to your needs.

AN OPTIMUM CONTROL CONCEPT

TEM (Total Electronic Management) controls not just the engine… but the entire system including the heat supply from cogeneration. Temperature monitoring for each cylinder and anti-knock control ensure the best possible utilisation of fuel and maximum power output, even if gas composition fluctuates.

FLEXIBLE USAGE

The gas-mixer and TEM allows use for a wide variety of gases. Even the most problematic gases such as landfill gas and sewage gas can be used without difficulty.

PERFORMANCE DATA SHEET Gas Engine 1200kWe

MWM TCG 3020 50HZ

2,300kWe

  • 20cyl 2,300kWe
Gas Engine 2300kWe

The All-Round Talent

HIGH PROFITABILITY

High efficiency values, low oil consumption – 0.15g/kWh and up to 80,000 operational hours until major overhaul resulting in high profitability for the customer.

HIGH RELIABILITY

Reliable and proven core engine upgraded with state of the art technologies and extended maintenance intervals.

HIGH EFFICIENCY

Offering increased electrical efficiency of up to 45 percent (Natural Gas) and up to 43.6 percent (Biogas), the TCG 3020 gas engine increases electrical output of up to 2,300kWe and provides an optimal balance between efficiency and reliability.

VARIETIES OF GASES AND APPLICATIONS

Available for different applications such as natural gas, biogas, landfill and propane gas operation.  The TCG 3020 genset is optimised for high efficiency, flexibility and biogas.

NEW ENGINE AND PLANT CONTROL SYSTEMS TPEM

Hardware and Software for the gas engine generator and a holistic plant control.  The TCG 3020 enables full power capability of the genset with maximum reliability, availability, performance and usability.

HIGH POWER DENSITY

With its compact design, the TCG 3020 delivers up to 15 percent more power output at the same size as its predecessor.

PERFORMANCE DATA SHEET Gas Engine 2300kWe

MWM TCG 2032 50HZ

3,333kWe - 4,500kWe

  • 16cyl 4,500kWe
  • 12cyl 3,333kWe
4500kWe MWM genset

High Availability. Low Installation Costs

MORE PROFIT

The optimised maintenance concept with cylinder units simplifies accessibility and, along with the reduction of the number of different parts, minimises the time required for maintenance. This can save you up to 20 percent in service costs. At the same time, you profit from up to 30 percent less lubricating oil consumption compared to other engines.

LONGER RUN TIMES

Thanks to the extended service intervals, the TCG 2032 gas engine runs up to 200 hours longer per annum than comparable products. The major overhaul is scheduled after 80,000 operating hours.

GREATER RELIABILITY

The particle-free combustion, with chamber plugs, extends the service intervals for the exhaust gas heat exchanger and reduces service costs compared to other combustion methods. Major components such as pistons, conrods, spark plugs and cylinder heads have been improved to withstand the greater power output and to deliver increased electrical efficiency.

OPTIMUM EFFICIENCY

The interaction of all components has been improved even further. All components relevant for efficiency and power output are monitored by the TEM (Total Electronic Management). The new, upgraded wastegate in particular ensures a more efficient operation with changing conditions. This is also the case when the gas composition is fluctuating – thanks to fast response times due to the temperature monitoring for each cylinder. TEM not only controls the engine… but the entire system… including heat extraction.

FULL TURBO POWER

The high-pressure turbocharger A140, with an improved wastegate, allows operation with a broader air intake temperature range and up to higher altitudes.

PERFORMANCE DATA SHEET 4500kWe MWM genset

MWM TCG 3042 50HZ

9,830kWe - 10,300kWe

  • 20cyl 10,300kWe
10300kWe MWM genset

Strong and Efficient

MAXIMUM EFFICIENCY

With outputs ranging from 9,830kWe to 10,300kWe, the new TCG 3042 boasts the highest output in the MWM product range with maximum electrical efficiency achieving 48 percent and best total efficiency of 93 percent.

OPTIMUM SPACE UTILISATION

Fewer components through modular design and integral structure ensure fast setup and minimal footprint.  Because of its standard modular design, minimal space is required between multiple engine installations.

EASY MAINTENANCE AND LOW OPERATING COSTS

The TCG 3042 greatly reduces operating costs through easy maintenance and long maintenance intervals.  The genset offers high reliability, modular design, and integral structure which reduce the number of components and facilitate the maintenance.

HIGH FLEXIBILITY

Suitable for natural gas applications and can be optimised for Combined Heat and Power (CHP) generation or for power generation only (depending on the application scenario).  The TCG 3042 is available for high altitude installations, high intake air temperatures, and various fuel gas types with different methane numbers.  Elsewhere, the TCG 3042 can be configured between summer and winter mode for Cogeneration power plant applications.

10300kWe MWM genset